Industrial Energy Savings

Wind-Propelled Generator

Teseo is introducing a wind-propelled generator with a horizontal rotation axis, consisting of a spindle running on ball bearings, that supports three aluminum blades and is connected to the shaft of an air compressor.

The wind-propelled generator is mounted on top of a high aluminum framework by means of a swiveling arm. The generated compressed air is carried through pipes to a reservoir at the base of the supporting framework, and then is stored in large pressure vessels.

This innovative solution uses clean energy from a renewable source at zero cost. The unit is based on very simple and cost-effective equipment. The generator is independent of wind direction and it produces energy even at low wind speeds.

Wind generator with twisted aluminum blades: 3 blades

Outer generator diameter: 4 meters

Opposed piston compressor: 2 pistons

Wind generator orientation: 1 self-directing vane

Max. safety speed: 16 m/sec.

Height of supporting aluminum structure: 7 m

Compressor air volume intake: 374 cubic cm/revolution

Maximum compressed air pressure: 11 bar

Air volume generated at 4m/sec. wind speed: 2,300 liters/hour

Air volume generated at 8m/sec. wind speed: 4,600 liters/hour

Air volume generated at 12m/sec. wind speed: 6,900 liters/hour