Industries

There are three main segments in Visteon's climate group are climate systems, powertrain cooling and engine induction. Climate systems include refrigeration compressors, fluid transport, heat exchangers, battery cooling modules, climate controls, auto defog/demist systems, and multi-zone HVAC systems. Powertrain cooling systems include heat exchangers (radiators, condensers, charge-air, exhaust-gas), airflow management, and diesel and hybrid thermal management. Engine induction includes air induction systems and intake manifolds.

Several days prior to our visit, during a cold winter evening, the lead air compressor in one mechanical room tripped off (apparently due to a fouled intake filter and low air flow through the machine). A crucial situation then developed: The "stand-by" unit did not start. Maintenance folks had to be called in to get a compressor running. That delay caused low plant air pressure, production curtailment and some defective product. They had yet to determine the conditions that caused the "no-start".

Nitrogen gas provides a number of diverse uses for a wide variety of manufacturers. As a sister function of compressed air, on-site nitrogen generation can provide additional opportunities for cost savings and other efficiencies for manufacturers who shift from delivered liquid nitrogen service.

Compressed Air Best Practices interviewed Doug Barndt (Manager, Demand Side Energy-Sustainability), Joseph Gress (Principal Engineer, Demand Side Energy) from Ball Corporation and Chris Gordon (Compressed Air System Specialist) from Blackhawk Equipment.

Encouraged by government regulators, the conversion to waterborne paints is now moving into the collision repair and refinishing industry. The conversion to waterborne paints is proving to have implications for the compressed air systems in the shops. This document provides a checklist of compressed air system topics to ensure a successful conversion to waterborne paints.

This article describes a compressed air retrofit project implemented at Kellogg’s Eggo factory located in San Jose, California. Kellogg’s continues to realize both annual energy savings and quality improvements because of the upgrade. In addition, Kellogg’s received a substantial utility incentive from Pacific Gas and Electric Company, which was based on the achieved energy savings.

Power Smart® efficiency measures for compressed air systems at Tolko’s paper mill and sawmill at The Pas are saving the company more than \$125,000 a year.

Pneumatic air cylinders play a major role in allowing a modern sawmill to produce at the high-speed production rates required. Stable air pressure is critical to allow the air cylinders to respond in a timely manner and avoid any production delays.

Recently, this major pulp & paper mill made compressed air optimization a mill-wide priority. At the request of the utility company providing energy to the mill, Compression Energy Services performed a comprehensive energy analysis that outlined the following four energy efficiency measures (EEM’s) for the mill to consider.

“We are close to becoming a zero-landfill facility. Zero-waste is the goal,” Mike explained. Company literature on the Green Factory initiative, coordinated in North America by Karen Heyob, Associate Chief Engineer for Honda of America Mfg., Inc. , says the initiative is designed to reduce the impact of Honda’s manufacturing operations on the environment. This includes efforts to reduce the energy intensity of production, as well as initiatives to reduce waste generation, air emissions, and water use at all of the company’s manufacturing facilities in North America.