Compressed air is used in all the company’s plants and is often the single largest energy end use within them. As a result, compressed air energy-saving measures are often replicable across the company and offer significant positive impacts. One area of focus is with compressed air leaks since they are “the best low hanging fruit to focus on and they always keep popping up and waste energy”.
The use of high performance boosters to raise low pressure air (100 psig) to high pressure air (500-600 psig) for blow molders is very power efficient and offers good operating performance and reliability when well applied.
When selecting an air compressor for your manufacturing operation, the common choice is the industry-standard rotary screw compressor. Known as the work horse of compressed air machinery, the rotary screw compressor comes in a multitude of sizes and power levels. However, centrifugal compressors have seen some exciting technological progress in recent years and offer a wide range of pressures, flow and turndown. Long known for their longevity and durability, they offer higher efficiency, even qualifying for energy rebate programs offered by local utilities and all, notably, produce Class 0 oil free air.
Berry Global was established in 1967 as a small hometown company, based in Evansville, Indiana. Today it is still headquartered in Evansville but has grown to 48,000+ global employees and more than 295 locations. Generating \$12.6 billion in 2019 pro forma net sales, Berry Global creates innovative packaging and protection solutions.
When compressed air is essential to the production of up to one million plastic containers per day there’s little room for error. That’s why Schoeneck Containers, Inc. (SCI) leaves no stone unturned to ensure its compressed air systems run smoothly at all times and without fail at its bustling facilities in Wisconsin.
In February 2021, Compressed Air Best Practices® Magazine interviewed members of the Intertape Polymer Group Inc. (IPG) Sustainability Pillars team to gain an understanding of the work being done to improve energy efficiency. The team members interviewed were Michael Jones (Director of Corporate Energy), Michael Deitering (Senior Project Engineer), Jarrod Knapp (Maintenance Manager) and Mark Secord (Engineering Group Leader).
By making changes primarily focused on compressed air uses, Winpak, an international plastics products manufacturer based in Winnipeg, Manitoba, Canada, increased compressed air production capacity and reduced annual energy consumption by 33%. These benefits have been accomplished while the company was making the switch to lubricant-free compressed air to support product quality goals. This article discusses some of these changes and addresses measures that could be implemented in any compressed air system.
For more than 20 years, Hungarian-based Doroti Pack Ltd. has specialized in the production and servicing of state-of-the-art packaging machines. Their focus is on developing, manufacturing, producing and selling premium-quality packaging equipment, including their line of DorPack thermoforming machines which are often used for food products such as fresh meat, fish, dairy products, bakery ware, confectionery and ready-cooked foods. Dorati Pack chose to incorporate Aventics pneumatic components in latest thermoforming machine for optimal productivity and machine longevity.
On a recent project, at a polyethylene terephthalate (PET) blow-mold and filling operation, a very effective measurement plan resulted in a full synchronization of the supply side air to blow molds with significant reduction in total air use and increases in productivity and quality.
The plant produces both molded and blow molded plastic parts on a 5 day per week, three shift schedule. Production and maintenance sometimes occurs on weekends, occasionally requiring the air compressors to run on a 24 x 7 basis so the practice was to leave the compressed air system always pressurized. The system consisted of three modulating lubricated screw compressors one sized at 150 hp and the others 125 hp (3 units), each controlled with their local compressor controllers.
The Pepsi bottling plant in Winnipeg, Manitoba has upgraded both their main 100 psi compressed air system and their 600 psi PET bottling system in two separate projects. The system improvements have saved the company both maintenance and electrical operating costs, and even reduced some winter heating demand.