Industrial Utility Efficiency

System Assessments

Given that compressed air leak management programs are meant to save energy, reduce CO2 emissions, and generate ROI, DENSO’s Maryville, Tennessee, manufacturing facility can definitively say it has scored a trifecta when it comes to results – and reaped benefits beyond hard numbers alone.

Eliminate the Cost of Artificial Demand with Proper Storage and Piping

This article reviews the benefits and design considerations of controlling system pressure from the air compressor room to the production headers and selected production processes and areas. Over the last several decades, the phrase “demand-side control” has become the generic term to describe establishing a “flat line” header pressure using proper storage and an appropriate pressure regulator, or “pressure flow controller.” Use of a demand-side controller to control pressure and flow can be implemented at the entry to the production area header(s) and at selected production areas or processes.

Everyone Wins with Tennessee Tech University Industrial Assessment Center Program

Launched in 2006, the TTU-IAC program provides manufacturers in the state with free energy, productivity, and waste assessments – including best practices for compressed air systems, and blowers and vacuum, as well as cooling towers and chillers. The assessments to date have provided manufacturers in the program with \$27.48 million in recommended cost savings, equaling 3.82 trillion British thermal units of energy savings.

Integration: Should Compressed Air Monitoring be Combined with Control?

Maintenance is the customer of controls and energy engineering is the customer of monitoring. And I discussed potential problems that can occur when combining monitoring and control in the same system. In this article, I will get more specific about building practical systems that address both controls and monitoring.

SumiRiko Tennessee Saves Energy & Boosts Sustainability with Compressed Air System Upgrade

In a strategic approach to improving its management of compressed air, the company initiated an upgrade of its compressed air system at its Midway plant. In so doing, SumiRiko Tennessee saves 2.1 million kWh and \$100,000 in energy costs per year at the plant.  Additionally, lower energy use resulted in the reduction in CO2 of 800 tons per year. With a utility rebate, the project paid for itself within two years.

Control Strategies for Efficiently Operating Multiple VFD Air Compressors

By far the most important development in the world of screw type air compressors has been the introduction of variable speed control using electronic variable frequency drives (VFD’s). Systems that run with at least one air compressor at part load can almost always operate more efficiently if a well-controlled VFD is added to the system. But what if a system has two or more VFD units? This article discusses the challenges in controlling multiple VFD air compressors with some suggested solutions.

Use Baseline Measurements to Improve Compressed Air Supply Performance

Baseline measurements include flow, power, pressure, production output, and other relevant variables impacting compressed air use. These data evaluate trending averages to develop Key Performance Indicator (KPI) and Energy Performance Indicator (EnPI) parameters and establish base‑year performance. The focus of this article is the application, evaluation, and analysis of baseline measurements to provide information necessary to improve Compressed Air Supply Efficiency.

Don’t Overlook Tubing Volume with Manifold-Mounted Pneumatic Valves To Conserve Energy

The advent of manifold-mounted, plug-in pneumatic valves has been a boon for machine builders. It allows them to mount complete valve packages in a safe and secure location on a machine. Using a D-sub connector, serial interface module, or similar single-point wiring system, all of the electrical control outputs can feed into one location on the manifold, greatly simplifying the wiring.

Start with Monitoring to Achieve Compressed Air System Efficiencies

Compressed air represents one of the largest opportunities for immediate energy savings, which accounts for an average of 15% of an industrial facility’s electrical consumption. In fact, over a 10-year period, electricity can make up 76% of the total compressed air system costs. Monitoring compressed air usage, identifying compressed air waste and inefficiencies, and making investments in new compressed air equipment – including piping – are tangible ways businesses can cut their operating costs by lowering their electricity bill.

Automaker Saves $600,000 Yearly In Energy Costs & Improves Compressed Air System Reliability

The project, which also involved the addition of a booster air compressor and receiver tank – along with the installation of an important pressure control valve – gives the automaker the ability to run fewer centrifugal air compressors during peak production. In so doing, the plant saves nearly 6.1 million kWh and more than \$600,000 per year in energy costs. The project also qualified for a \$369,374 rebate from the local utility, resulting in a six-month project payback – all while improving system reliability.

Compressor Controls

As part of its ongoing corporate initiative to find ways to reduce its energy bills, and the costly

Piping Storage

Blowing a jet of compressed air at an object is a common but “poor” use of compressed air. Often

End Uses

In this article, we will provide detail on the characteristics of the baseline system and then

Pressure

During Dealer Week, they needed enough compressed air to power multiple machines at a time all day

Air Treatment/N2

Over the last two decades, there has been a significant increase of manufacturing facilities

Leaks

Given that compressed air leak management programs are meant to save energy, reduce CO2 emissions,

Pneumatics

If there was ever a place where manufacturers can save energy using compressed air and make

Vacuum/Blowers

A ‘Process’ application, is one where it’s all about controlling the contents of a vessel, pipeline