Industrial Utility Efficiency

Bulk

Compressed Air at a West Texas Silica Mine

By Troy Dreier, Senior Editor, Compressed Air Best Practices® Magazine 

Compressed air system reliability relies on engineering expertise, environmental management and proactive maintenance. This article highlights how Brandon & Clark improved performance in two demanding applications: reducing failures in a dust-heavy silica mining operation through frequent preventive maintenance, and executing a complex disassembly and reassembly of a 300 hp air compressor in a confined university facility while preserving the OEM warranty. These cases show how tailored solutions and long-term service strategies enhance system reliability.

Read Full Story

20 Years of Case Studies: Plants Sharing Best Practices

Edited by Troy Dreier, Senior Editor, Compressed Air Best Practices® 

For 20 years, Compressed Air Best Practices® Magazine has published articles focused on helping manufacturers reduce power demand, lower water consumption, and improve the performance of compressed air, cooling, blower and industrial vacuum systems. In this article, we highlight a sampling of those stories across the following industries: Plastics and Packaging Food and Beverage Automotive and Transportation Cement, Building Materials, and Mining Metals, Pulp, and Paper Pharmaceuticals, Healthcare, and Research Wastewater Treatment 
[ Read Full Story ]

Air Cannon Innovations in Preheater Towers

By Brad Pronschinske, Director of Air Cannons Business Group, Martin Engineering

An essential part of the cement production process is the consistent flow of bulk materials, as poor material flow can put a stranglehold on a plant’s profitability. Accumulations in storage systems and process vessels can choke material movement, causing bottlenecks that create expensive obstacles to equipment performance and process efficiency. Poor material flow also raises maintenance expenses, diverting manpower from core activities. If they become severe enough, flow problems can bring production to a complete stop. 
[ Read Full Story ]

Compressed Air System Design for Dust Collectors

By Hank van Ormer, Technical Director, AP Energy

The dust is collected on the bag or fingers, and when the cake of dust is of appropriate thickness and structure, a pulse or pulses of compressed air hits or shocks the bag and knocks the cake off. This pulse may sometimes be accompanied by physical shaking and even reverse air flows, depending on design.
[ Read Full Story ]

Eagle Mine Redesigns Compressed Air System for Uptime Gains

By Mike Grennier, Compressed Air Best Practices® Magazine

When the design capabilities of an installed compressed air system didn’t align with real-world production needs at its ore processing mill in northern Michigan, Eagle Mine decided to move beyond theoretical compressed air concepts and deal in reality. After thorough analyses of its compressed air challenges and implementing a variety of solutions, the team at the mill bolstered the operation’s ability to efficiently mill approximately 2,200 metric tons of ore per day.  
[ Read Full Story ]

HAUG Oxygen Compressors for Efficient Gold Extraction

By Paul Frank, Technical Proposal Manager, Sauer Compressors USA

Logistics and supply problems are widespread on the African continent. Lack of infrastructure as well as capacity and efficiency deficiencies can affect supply chains and make them more expensive. Gold mines, which are often located in secluded areas, therefore seek to provide their entire infrastructure themselves. Even the oxygen required for efficient gold extraction by cyanide leaching is therefore not delivered but generated on site.
[ Read Full Story ]

CalPortland® Continues to Walk the Walk in Sustainability

By Mike Grennier, Compressed Air Best Practices® Magazine

A major producer of cement and building materials, CalPortland’s energy management efforts have reduced the company’s overall energy intensity by 17.5% since 2003, avoiding \$149 million in unnecessary energy costs – and over 3.3 million metric tons of Greenhouse Gas (GHG) emissions. In 2020, the company achieved what no other U.S. Industrial company has: It earned the ENERGY STAR® Partner of the Year Award for the 16th consecutive year.
[ Read Full Story ]

Dust Collector Pilot Program Points to 16 GWh of Energy Savings at Imerys Minerals Processing Facilities

By Mike Grennier, Compressed Air Best Practices® Magazine

For Imerys S.A. there’s little question about the importance of managing dust collection systems it uses to control and reduce harmful particulates in its worldwide minerals processing facilities. And now there’s zero doubt about the tremendous energy savings it stands to save by reducing the amount of compressed air needed for these same dust collectors.
[ Read Full Story ]

Sustainability is “Part of Who We Are” at Eastman

By Mike Grennier, Compressed Air Best Practices® Magazine

By making sustainability a requirement and a core element of its growth strategy, Eastman has improved the energy efficiency of manufacturing operations by 13% since its baseline year of 2008 (the year Eastman became an ENERGY STAR® Partner). By 2018, Eastman had decreased its greenhouse gas intensity by 20%, two years ahead of its goal. Additionally, Eastman received the 2019 ENERGY STAR® Partner of the Year Award for Sustained Excellence, marking the company’s eighth consecutive ENERGY STAR award: two years as Partner of the Year and six years of Sustained Excellence recognition.
[ Read Full Story ]

How to Keep Reverse Pulse Dust Collectors Operating Efficiently and Reliably

By Ron Marshall, Marshall Compressed Air Consulting

Reverse pulse type dust collectors often represent a challenge to compressed air energy efficiency, and sometimes throw a wrench into the works by causing huge air pressure fluctuations, high transient flows and just plain large leaks. This article discusses this type of dust collector, often installed in food processing plants, and gives some real-life examples of problematic installations. Some suggested measures are mentioned to ensure your dust collectors keep running in a trouble-free manner.
[ Read Full Story ]

A Pulse Jet Dust Collector Optimization Study

By Russell Morine, Compressed Air Systems Evaluation Specialist, The Baker Group

A flour based frozen foods manufacturer orders a compressed air efficiency audit. The audit establishes the cost of compressed air at \$0.27/1000 cubic feet. The study finds the 116 pulse jet dust collectors represent the greatest opportunity for compressed air demand reduction and energy cost savings. A dust collector optimization study/service is suggested and the customer agrees to proceed. In this facility, pulse jet dust collectors are used to filter dust from raw materials entering the plant, for conveying and mixing of ingredients, and for the final packaged finished products leaving the plant.  
[ Read Full Story ]