Industrial Utility Efficiency

Vacuum/Blowers

The Business Case for Air Compressor Rentals and Air-Over-the-Fence

By Matt Piedmonte, Vice President and General Manager, Americas, Aerzen Rental Solutions

There is no single right approach to putting the necessary volume and pressure of air in the pipe to meet production needs. There is a place for purchasing assets, there is a place for renting assets and there is a place for an AOF contract. Just as the business models around these assets change, so do the needs of an industrial plant. This article aims to explore these options and explore some of the pros and cons associated with different methods. 

Read Full Story

Thought Leaders on System Optimization Past & Future

Edited by Troy Dreier, Senior Editor, Compressed Air Best Practices® Magazine

We asked a hand-selected list of original equipment manufacturers, independent compressed air system sales and service companies, manufacturing plants and independent system auditors to share their thoughts, highlighting the changes they’ve seen over the past 20 years, then predicting what the next 20 years will bring.
[ Read Full Story ]

Industrial Blowers Reduce Energy Use in Aluminum Casting Plant

By Alper Alten, Founder, AAPM Project Management and Consulting

This article explores how a focused engineering intervention driven by data and a clear understanding of process requirements led to a transformative change on a aluminum production plant.  By switching from traditional compressed air systems to low-pressure industrial blowers the plant not only maintained product quality, but also achieved a dramatic reduction in energy use saving nearly \$455,000 annually.
[ Read Full Story ]

When to Repair vs. Replace Your Vacuum Pump: A Guide

By Mary MacGregor Velhinho, Busch Vacuum Solutions

If your vacuum pump is malfunctioning, you are faced with a choice: repair or replacement. Our guide will take you through both options and provide recommendations on when it makes sense to repair vacuum pumps and when to replace them. We will also take a look at how to spot and diagnose common issues before they lead to system failure. Whatever the path of action, the decision to repair or replace always begins with testing and diagnosis. A factory-trained service technician who specializes in vacuum pump services inspects the equipment and identifies the problem.
[ Read Full Story ]

Advanced Vacuum Generation Reduces Maintenance

By Dr. Fabian Fahlbusch, Head of Content Marketing, Busch Vacuum Solutions

Industrial ceramics have been produced in Hermsdorf, near Jena, since 1890. In the past, high-voltage insulators; now, ceramic honeycomb bodies for heat exchangers, ventilation and emission control systems. They have always kept up with the times, developing innovative materials, products and state-of-the-art production processes to do so. 
[ Read Full Story ]

Vacuum Fundamentals: Process Applications & Oil-Free Technology

By Bryan A. Jensen, Engineered System Solutions Manager, Rogers Machinery Company

A ‘Process’ application, is one where it’s all about controlling the contents of a vessel, pipeline, or chamber.  What is the gas makeup inside the vessel? How much of it is in there? All means to control a chemical and/or thermodynamic reaction so that we add value to some base ingredients to convert them into a marketable product. 
[ Read Full Story ]

Boosting Process Vacuum Performance at a High-Tech Electronics Plant

By Bryan Jensen, Engineered System Solutions Manager, Rogers Machinery Company

Electronics applications typically run their tooling requiring Process Vacuum based on differential pressure from barometric; that is, they control their PVAC pumps to “Inches of Mercury Vacuum”. This is because the parts and pieces being manipulated by vacuum are of certain sizes, shapes, and weights. If the differential pressure across the part is not great enough, then the tooling will fail and result in a loss of product, adverse impact to quality, and production downtime. 
[ Read Full Story ]

Whiskey Distillery Compressed Air Study Saves Energy

By Ron Marshall, Marshall Compressed Air Consulting

A premium whiskey distillery was seeking to renew their compressed air system and meet their corporate mandate in making their production facility more efficient. The first step on the road to improvement was having their compressed air system assessed. This article discusses some of the findings of the system study, which saved significant energy, improved system reliability, and captured a significant utility incentive to help with the study costs and the cost of a new compressor.
[ Read Full Story ]

Industrial Central Vacuum System Evaluations: Part 2 Audit Measures

By Hank van Ormer, Technical Director, Air Power USA

Operating the vacuum system at higher levels (then necessary) affects the needed volumetric flow to compensate for leaks. This required compensation of volume (ACFM) must be added to the nominal production flow demand. The ambient air leak into the system will expand to the highest vacuum level, which is known as the “Expansion Ratio.”
[ Read Full Story ]

Industrial Central Vacuum System Evaluations: Part 1 Measurement

By Hank van Ormer, Technical Director, Air Power USA

What is vacuum as used in the manufacturing/industrial sector? The clearest answer is – a contained space with gaseous pressures much less than surrounding atmospheric pressure. Atmospheric pressure (ATM) is expressed in many units of measure. At room temperature a cubic foot of contained air at sea level – the random movement and molecular impact on the walls of the containment vessel equal a force of 14.7 psia for every square inch of the walls.
[ Read Full Story ]

When Mixing is the Goal, Why Would You Aerate? Compressed Gas Mixing Provides an Alternative Approach

By David Lauer, P.E., EnviroMix

At the beginning of the 20th century, biological wastewater treatment — more specifically, the activated sludge process — was developed and became widely accepted as the treatment method for municipal wastewater, helping to protect our lakes and rivers from pollutants and support public health. In 1947, the Committee on Development of Uniform Standards for Sewage Works was created by the group known as the Great Lakes – Upper Mississippi River Board of State and Provincial Public Health and Environment Managers. 
[ Read Full Story ]