The purpose of this article is to point out the key performance indicators (KPI’s) that can assist in maintaining the performance and troubleshooting of compressed air dryers. The most important KPI to monitor is the pressure dew point (PDP) of the compressed air exiting the dryer(s). The PDP of the compressed air should be monitored at the discharge of each dryer and downstream of where the compressed air from multiple dryers converges.
One of the most satisfying parts of being a compressed air system auditor is resolving compressed air system reliability issues. This article exposes a seldom, if ever, mentioned problem that can occur when air dryers are dedicated to air compressors. It examines a real-world application and discusses the action taken to remedy the situation.
There is always something new to learn about compressed air systems – particularly in regards to compressed air dryer installations. As I discussed in Part 1 of this series, you can make compressed air dryer installations more reliable by understanding the consequences of any modifications you make to the system. As a continuation of those ideas, Part II explores more ways to make a dryer installation more reliable. Discussions include: the difference between operating a desiccant dryer in a fixed cycle opposed to demand mode, what happens when you operate a heated desiccant dryer with the cooling air turned off, and how to deal with the unintended consequences of dedicating a desiccant dryer to a compressor.
In compressed air systems, every adjustment or system modification has consequences, so, before making changes, it’s important to understand how those changes will affect each piece of equipment. For example, simple things — such as lowering the compressor’s pressure set point, or failing to maintain the compressor’s aftercooler — can result in moisture contamination occurring out in the system. Why? Because the effects of these actions reduce the air dryer’s capacity. In this article, I address some ideas that can make your system more reliable.
As plant personnel know, repairing compressed air leaks can be an expensive, labor intensive and never-ending process. This article discusses ways plant personnel can reduce and maintain their leak rate at a lower level without repairing leaks. It discusses how pressure/flow controllers, variable speed and variable displacement compressors, automation, and addressing critical plant pressures allow plant personnel to lower the header pressure, which eliminates artificial demand and controls the leak rate. More importantly, the article brings a new dimension to the idea of turning off the air to idle equipment by focusing plant personnel’s attention on the idle time within the cycle of operating equipment.
Years ago, while managing the service department of my compressor distributorship, I received a call from a nearby customer who told me his 200hp compressor wouldn’t make any air. When I arrived at the plant I found the inlet air filter differential indicator showing “Red”, which indicates the filter element was dirty. When I pointed this out the maintenance manager said he had just changed the filter element; however, when I removed the element the compressor immediately started making air. He then admitted that the element was one that they had simply washed out approximately seven times before. Unwittingly, when he tried to save money by cleaning the filter element he was increasing his energy cost several times more than the cost of the element.
