Industrial Utility Efficiency    

Upcoming Webinars and Archives

The Best Practices Magazines Expert Webinar Series

IoT and Master Compressed Air System Controls - Learn More -

Sponsored by Kaeser Compressors - December 14th, 2017 - 2:00 PM EST - Free Registration.

● How to Size VSD Air Compressors

January 25th, 2018 - 2:00 PM EST - Free Registration.

● 5 Installation Tips for Flow and kW Meters

February 22th, 2018 - 2:00 PM EST - Free Registration.

● Pros & Cons of Centralized Vacuum Systems

March 15th, 2018 - 2:00 PM EST - Free Registration.

● Safe Quality Foods Standard: 5 Compressed Air Criteria

March 28th, 2018 - 2:00 PM EST - Free Registration.

● Centrifugal Air Compressor Turndown & Control

May 17th, 2018 - 2:00 PM EST - Free Registration.

● 3 Benefits of Onsite Nitrogen Generation

June 7th, 2018 - 2:00 PM EST - Free Registration.

5 Tips on Optimizing VSD Vacuum Pumps

June 28th, 2018 - 2:00 PM EST - Free Registration.

● 5 Tips on Optimizing VSD Air Compressors

July 19th, 2018 - 2:00 PM EST - Free Registration.

● 5 Tips on Optimizing VSD Chillers

August 16th, 2018 - 2:00 PM EST - Free Registration.

● Instrument Air & NFPA Standards: System Design & Measurement

September 6th, 2018 - 2:00 PM EST - Free Registration.

● EPA Compliance: Condensate Drain Maintenance & Oil Separation

November 15th, 2018 - 2:00 PM EST - Free Registration.

 

Webinar Archive

When to Install VSD Chillers. Presented by Fred Berry and Spencer Fuller, Johnson Controls.

Heat of Compression Desiccant Dryers Basic Principles - Presenter Hank Van Ormer from Air Power USA. Sponsored by Henderson Engineering Company.

Integrating Aeration Blowers with Most-Open-ValvePresenter Tom Jenkins, President of JenTech Inc. Sponsored by AGP Neuros.

Nitrogen Use in Food Processing & Packaging - Presenter Bruce Welt, Professor in the Agricultural and Biological Engineering Department at the University of Florida. Sponsored by Parker Industrial Gas Filtration and Generation Division.

Evaluating the Centralization of Vacuum Systems Presenter Tim Dugan, P.E., President of Compression Engineering Corporation. Sponsored by Atlas Copco & Busch Vacuum Pumps and Systems.

Installation Guidelines for Flow Meters. Presenter Tim Dugan P.E., Sponsored by Trace Analytics & VPInstruments.

Blower Controls for Aeration Efficiency. Presenter Tom Jenkins, President of JenTech Inc. Sponsored by Kaeser USA.

Benefits & Technology for Decentralizing a -40 ºF Dew PointPresenter Hank Van Ormer from Air Power USA. Sponsored by BEKO Technologies & Kahn Instruments.

When to Install a VSD Air Compressor. Presenter Tim Dugan P.E., Sponsored by Atlas Copco & VPInstuments.

Blower Demands with DO Control. Presenter Tom Jenkins P.E., from JenTech Inc.

Establishing Best Practice Compressed Air Flows. Presenter Hank Van Ormer from Air Power USA. Sponsored by CDI Meters.

Benefits of Desiccant Dryer Dew Point & Purge Control. Presenter Hank Van Ormer from Air Power USA. Sponsored by Beko Technologies.

5 Energy Treasure Hunts for Chilled Water. Presenter Mike Flaherty, General Manager of tekWorx.

Designing for 8 to 1 Aeration Blower Turndown. Presenter Tom Jenkins, President of JenTech Inc. Sponsored by Kaeser USA.

Balancing Energy Efficiency & Dewpoint with Desiccant Dryers. Presenter Hank Van Ormer from Air Power USA. Sponsored by Kahn Instruments.

How Traditional Chiller Plant Design and Operation Reduces System Efficiency. Presenter Mike Flaherty, General Manager of tekWorx.

Common Desiccant Compressed Air Dryer Sizing Errors. Presenter Hank Van Ormer from Air Power USA. Sponsored by Beko Technologies.

Measuring Flow: A Critical Component of any Compressed Air Management System. Presenter Hank Van Ormer from Air Power USA. Sponsored by Festo & VPInstruments.

Calculating Aeration Flow and Pressure Requirements. Presenter Tom Jenkins form JenTech Inc. Sponsored by Atlas Copco.

Pressure Drop and Leaks: Repairing Regulators/Filters on Production Equipment. Presenter: Peter Rhoten from Hope Air Systems. Sponsored by CDI Meters.

Global Food Safety Initiative (GFSI) Compliance: Two Compressed Air System Specifications. Presenter: Jason Wizner from DirectAIR. Sponsored by Atlas Cocpo & Trace Analytics.

Integrating ISO 8573-1 Compressed Air Quality Classes into SQF Food Safety Certification. Presenter: Phil Kruger, Harris Equipment. Sponsored by Atlas Copco.

Lowering Compressed Air Pressure: What Works in the Plastics Industry. Presenter: Peter Rhoten, Hope Air Systems. Sponsored by Kaeser Compressors.

Metal Fabrication and Machining Best Practices with Compressed Air Systems. Preseneter: Andy Poplin, Atlas Machine & Supply. Sponsored by Beko Technologies.