In this article we will discuss how to achieve actual oil-free air from your air compressor, no matter what type of air compressor it is. Air compressors of all designs turn mechanical power into pneumatic power by successively concentrating air across compression stages. A rotary screw air compressor, for example, utilizes rotating helical screws to drive air forward, increasing its pressure by reducing the volume of space the air mass takes up. Mechanical compression of this nature takes quite the force and energy to accomplish, which equates to heat generation and physical wear inside of the compressor.
ISO and CAGI
Many astute air compressor users have noticed the Compressed Air and Gas Institute (CAGI) air compressor data sheets, dated after June 2020, have a new term listed; isentropic efficiency. Isentropic Efficiency will be the new standard of reference for a true comparison of the overall efficiency of air compressors at any rated discharge pressure. Now users can see which company produces the most efficient product with an easy reference percentage number. The compressed air industry, in conjunction with CAGI, has been trying to make fair comparisons between air compressors for years.
For an organization to prove that it meets the standard it has to undergo a management system audit, either internal or external. The question, therefore, is how can those utilizing compressed air effectively evaluate their assets’ performance as part of an ISO 50001 energy management system and, in doing so, grow their bottom line and minimize their negative environmental footprint.
In modern and industrial work settings, people spend more than 90% of their time in enclosed spaces, such as warehouses, office buildings and factories. In most indoor environments, the air contains a variety of chemical and microbial particles, commonly defined as indoor pollutants, which can severely affect human health and product quality (1). Industries like food and beverage, medical devices and pharmaceutical manufacturers rely on their scheduled compliance testing to confirm the presence or absence of issues in workflow pipelines that are detrimental to the daily output and safety of the product.
An Energy Management System (EnMS) according to ISO 50001:2018 provides companies with a strategic tool to help manage the performance of energy-consuming equipment, including compressed air systems. Improved performance of a compressed air system, in turn, can go a long way toward lowering energy costs and improving system uptime, both of which provide the ability to reduce the company’s carbon footprint. Here’s a look at the standard and important considerations involved in the implementation of an EnMS for a compressed air system according to ISO 50001.
This article will focus on ISO8573-7 normative test methods and analysis for viable microbiological contaminants and how it can be fundamentally utilized in compressed air microbial monitoring plans. The quality of the compressed air must be monitored periodically to fulfill national and international standards. ISO 8573 is an available standard addressing compressed air quality. It consists of nine parts that address purity classes, specifications, and procedures. ISO 8573-7:2003, can be utilized across all industries’ compressed air microbial monitoring plans. It contains both informative and normative procedures but lacks any tested compressed air microbial specifications regarding colony enumeration limits for microbial plate counts.
Compressed air contains contaminants such as dirt, water and oil which must be removed before use. ISO8573.1 specifies air quality classes for these contaminants. Humidity is expressed in terms of Pressure Dew Point (PDP). PDP is the temperature at which air is fully saturated with moisture, when the air temperature falls below this point further condensation will occur.
The days are long gone when power to a motor was controlled with a knife switch. These were cumbersome and downright dangerous to man and equipment alike. Every electric motor has some form of controller, responsible for turning over (starting) the motor or motor-controlled equipment. These controllers offer differing features and complexity depending on the application, United States electrical codes require the use of a motor starter that meets NEMA’s National Electrical Code as well as all local electrical codes.
Compressed Air Best Practices® (CABP) Magazine and the Compressed Air and Gas Institute (CAGI) cooperate to provide readers with educational materials, updates on standards and information on other CAGI initiatives. CABP recently caught up with Rick Stasyshan, Technical Director for the Compressed Air and Gas Institute (CAGI) to provide readers with some insights into the benefits of CAGI’s Verified Performance Program for refrigerated compressed air dryers.
Compressed Air Best Practices® Magazine and the Compressed Air and Gas Institute have been cooperating on educating readers on the design, features, and benefits of centrifugal compressor systems. As part of this series, Compressed Air Best Practices® (CABP) Magazine recently caught up with the Compressed Air and Gas Institute (CAGI). During our discussion, we reviewed some of the things readers should consider when installing a centrifugal compressor system.
ISO 22000 is a food and beverage (F&B) specific derivative of ISO 9001, a family of standards from the International Organization for Standardization that details the requirements of a quality management system. It is a quality certification that can be applied to any organization in the food chain — from packaging machine manufacturers to the actual food processing facilities.