Industrial Utility Efficiency
A large chemical plant in Celje, Slovenia, planned to retrofit a kiln used to produce titanium dioxide. To make space for the new equipment related to the retrofit, the plant needed to relocate its high-pressure compressed air system feeding an adjacent pressing process used to dry the material before firing it in the kiln. However, a comprehensive compressed air audit using cloud-based software showed the plant did not need to relocate the system.
Reducing energy costs and pollution emissions involves many areas within an industrial facility. My studies have found seven (7) key (or common) areas where low cost practical projects can be implemented. Combined, these projects provide savings exceeding 10% of the annual energy spend with an average payback of less than one year.
Compressed Air Best Practices spoke with Jay Hedges (General Manager) of Mattei Compressors.
A four thousand, five hundred and fifty pound (4550 lbs.) race car is running at 170 mph and facing wind resistance of 150 mph. The car then enters a curve creating a three-degree “yaw” (the change in angle from the direction the car is headed and the airstream). The car struggles to maintain speed as the yaw changes and the dynamic downforce load on the car changes. Suddenly, the driver-less car comes to a stop on the stainless-steel track...
Compressed Air Best Practices Magazine interviewed Sid Van der Meer (President) and Terry Nickel (Office Manager) of the Northwest Equipment Company.
